NTS-3000 Safety Recommendations

Z Elproma Wiki Knowledge Base
Skocz do: nawigacja, szukaj

ATTANTION!
These are the important Safety Instructions that should be followed during installation and maintenance of the ELPROMA timeserver family product.

IMPORTANT NOTE
This equipment contains hazardous AC and DC voltages. Do not handle any metallic part until the power has been disconnected. Do not assemble, disassemble set when the power is ON. Making wiring and touching cables is strongly prohibited when power is ON. Please refer to your RACK’19 safety instruction to learn more about connecting power to equipment. The NTS-protection system requires PE line to be connected into RACK’19 din rails.

Elproma safety advises:

  • Safety first! Never work alone under hazardous voltage conditions
  • High short circuit current trough conductive materials can cause server burns
  • Check that the power cord(s), plug(s), and sockets are in good conditions
  • Always use qualified service personnel to install permanently wired equipment
  • Do not handle any metallic part before the main power has been disconnected
  • Take care your power lines and rack’19 frame is properly PE grounded
Źródło: „http://wiki.elpromaelectronics.com/index.php?title=NTS-3000_Safety_Recommendations&oldid=5046”