RBMTX-Lite QuickSetup
The QuickSetup page of RBMTX-Lite router is used to set the main functions of the device.
Local Area Network
In Local Area Network section you can set local IP address and IP netmask of the RBMTX-Lite. IP netmask must be entered in CIDR notation.
IP address change
To change the IP address:
- Write new address and use green "+" button.
- Save settings and wait for "Configuration changes applied." message.
- Delete "old" IP address by using red "x" button.
- Save settings, wait a while and type new address in the web browser.
Modem/GSM network
The Modem/GSM network section is used to configure the modem settings.
SIM1
The SIM1 tab is used to configure external (main, master) SIM card parameters (in other words, how modem will establish the mobile connection).
| Name | Value | Description |
|---|---|---|
| APN | string, default: internet | An Access Point Name (APN) is the name of a gateway between a GSM, GPRS, 3G and 4G mobile network and another computer network, frequently the public Internet. |
| PIN | 4-digit number | A personal identification number (PIN), or sometimes redundantly a PIN number or PIN code, is a numeric (sometimes alpha-numeric) passcode used in the process of authenticating a user accessing a system. |
| user | string | APN username used in connection authentication |
| password | string | APN password used in connection authentication |
SIM2
The SIM2 tab is used to configure internal (second, slave) SIM card parameters (in other words, how modem will establish the mobile connection).
| Name | Value | Description |
|---|---|---|
| APN | string, default: internet | An Access Point Name (APN) is the name of a gateway between a GSM, GPRS, 3G and 4G mobile network and another computer network, frequently the public Internet. |
| PIN | 4-digit number | A personal identification number (PIN), or sometimes redundantly a PIN number or PIN code, is a numeric (sometimes alpha-numeric) passcode used in the process of authenticating a user accessing a system. |
| user | string | APN username used in connection authentication |
| password | string | APN password used in connection authentication |
AT Interface
AT Interface tab is used to manage the modem over serial port (RS232 or RS485).
| Name | Value | Description | ||||
|---|---|---|---|---|---|---|
| Enabled | On/Off. Default: On | Activate or deactivate modem managing | ||||
| Serial port | RS232 or RS485. Default: RS232 | Choose the serial interface | ||||
| Baudrate | 9600, 14400, 19200, 38400, 57600, 115200, 128000, 256000 or 512000. Default: 115200 | Serial baud rate | Databits | 5, 6, 7 or 8. Default: 8 | Serial data bits | |
| Parity | None, Even or Odd. Default: None | Serial parity | ||||
| Stopbits | 1 or 2. Default: 1 | Serial stop bits |
Bands & Frequencies
Bands & Frequencies tab is used to manage the modem bands (2G, 3G and 4G) and set module LTE frequencies.
| Name | Value | Description |
|---|---|---|
| LTE/3G/2G | 2G, 3G, 4G, 2G>3G, 3G>2G, 4G>3G, 3G>4G, 4G>2G, 2G>4G, 4G>3G>2G or 2G>3G>4G. Default: 4G>3G>2G | Force the modem band. E.g. when "2G>4G" mode is selected, modem will try to login to the network using 2G band first, then to 4G. |
| LTE frequencies | Europe/USA. Default: Europe | Set LTE frequencies region |
SIM switching
SIM switching tab is used to manage the SIM cards switching rules.
| Name | Value | Description |
|---|---|---|
| SIM card active on startup | SIM1 (external) or SIM2 (hidden). Default: SIM1 (external) | Forces which SIM card to use at startup |
| Change SIM when mobile network not available ... | Never change, after 30 sec, after 90 sec, after 3 min, after 5 min, after 15 min, after 30 minor after 6 hours. Default: Never change | Sets the time after which it will switch the SIM card when network is not available |
Modbus TCP/IP Gateway
In Modbus TCP/IP Gateway section you can set MODBUS gateway configuration for monitoring RBMTX-Lite routers.
Modbus TCP/IP
| Name | Value | Description |
|---|---|---|
| Modbus GW/Terminal | Terminal (Modbus disabled) or Modbus Gateway enabled Default: Terminal (Modbus disabled) | Set Terminal or Modbus gateway on serial port interface |
| serial port | RS232 or RS485. Default: RS232 | Choose the serial interface |
| TCP/IP port | Number from 1024 to 49151. Default: 9000 | Sets the TCP/IP port |
| Baudrate | 9600, 14400, 19200, 38400, 57600, 115200, 128000, 256000 or 512000. Default: 115200 | Serial baud rate |
| Databits | 5, 6, 7 or 8. Default: 8 | Serial data bits |
| Parity | None, Even or Odd. Default: None | Serial parity |
| Stopbits | 1 or 2. Default: 1 | Serial stop bits |
Advanced modbus settings
Section for setting additional modbus settings.
| Name | Value | Description |
|---|---|---|
| Timeout | Number [sec]. Default: None | Modbus timeout |
| Pause | Number [sec]. Default: None | Pause time |