Tekst źródłowy strony Elproma Smart Manager SNMP

In the SNMP tab, it is possible to manage the SNMP module and to generate a simple SNMP configuration file to be loaded into the modem.

[[File:ESM_snmp.png|600px]]

==SNMP Control==

[[File:ESM_snmpcontrol.png|300px]]

Button description:

1. Enable/Disable the SNMP module on the modem.<br>
2. Load the SNMP configuration file.<br>
3. Delete the configuration from the modem. Deleting the configuration from the modem also results in automatic deactivation of the SNMP module in the modem.<br>

How do I start the SNMP module?
1. Load a configuration file into the modem. The SNMP configuration file should be named "snmpd.conf". Correctly loading the file will result in the SNMP configuration status changing to "Loaded".<br>
2. Next, use the butto n marked 1 to enable the SNMP module on the modem. Correctly enabling the SNMP module will result in the SNMP status changing to "Enabled".<br>

Notes: Loading an SNMP configuration file with a name other than "snmpd.conf" will result in an unresponsive modem.

==SNMP configuration file generation==

Note: The Teleorigin Manager application only provides a simple SNMP file generator function and is not a sophisticated tool. With the generator, it is possible to generate a configuration file template, which will allo w the SNMP module to be started quickly.

[[File:ESM_snmpconfiguration.png|600px]]

Button description:

1. Add SNMPv2c community string, IP and trap port.<br>
2. Edit SNMPv2c community string, IP and trap port.<br>
3. Remove the community string from the list.<br>
4. Add SNMPv3 user profile.<br>
5. Edit SNMPv3 user profile.<br>
6. Remove SNMPv3 user profile from the list.<br>
7. Generate configuration file.<br>

How do I add an SNMPv2c configuration to a file?

1. In the SNMP v2c field, click "Add".
2. Fill in the fields in the configuration window with the community string and the IP and port of the trap.

[[File:ESM_snmpconfigurationaddv2c.png|600px]]

3. Accept the data entered using the "Save" button. After this operation, the item should appear in the list in the SNMP v2c field. How do I add the SNMP v3 configuration to the file?
1. In the SNMP v3 Users field, click "Add".
2. Fill in the fi elds in the configuration window.