Elproma Smart Manager SNMP - Historia wersji

Elproma o 12:00, 9 sie 2023

2023-08-09T12:00:32Z

← poprzednia wersja		Wersja z 14:00, 9 sie 2023
Linia 7:		Linia 7:
	[[File:ESM_snmp.png\|800px]]		[[File:ESM_snmp.png\|800px]]

	==SNMP ~~Control~~== <!--T:3-->		==Obsługa SNMP== <!--T:3-->

	<!--T:4-->		<!--T:4-->
Linia 13:		Linia 13:

	<!--T:5-->		<!--T:5-->
	'''~~Button description~~:'''		'''Opis przycisków:'''

	<!--T:6-->		<!--T:6-->
	1. ~~Enable~~/~~Disable the~~ SNMP ~~module on the modem~~.<br>		1. Włącz/Wyłącz moduł SNMP w modemie.<br>
	2. ~~Load the~~ SNMP ~~configuration file~~.<br>		2. Załaduj plik konfiguracyjny SNMP.<br>
	3. ~~Delete the configuration from the modem~~. ~~Deleting the configuration from the modem also results in automatic deactivation of the~~ SNMP ~~module in the modem~~.<br>		3. Usuń konfigurację z modemu. Usuniecie konfiguracji z modemu skutkuje również automatycznym wyłączeniem modułu SNMP w modemie.<br>

	<!--T:7-->		<!--T:7-->
	'''~~How do I start the~~ SNMP ~~module~~?'''		'''Jak uruchomić moduł SNMP?'''

	<!--T:8-->		<!--T:8-->
	1. ~~Load a configuration file into the modem~~. ~~The~~ SNMP ~~configuration file should be named~~ ''snmpd.conf''. ~~Correctly loading the file will result in the~~ SNMP ~~configuration status changing to~~ ''~~Loaded~~''.~~<br>~~		1. Załaduj do modemu plik konfiguracyjny. Plik konfiguracyjny SNMP powinien mieć nazwę ''snmpd.conf''. Poprawne załadowanie pliku będzie skutkowało zmianą statusu konfiguracji SNMP na ''Załadowano''.
	2. ~~Next, use the button marked ''~~1~~'' to enable the~~ SNMP ~~module on the modem~~. ~~Correctly enabling the~~ SNMP ~~module will result in the~~ SNMP ~~status changing to~~ ''~~Enabled~~''.<br>		2. Za pomocą przycisku oznaczonego numerem 1 włącz moduł SNMP w modemie. Poprawne włączenie modułu SNMP będzie skutkowało zmianą statusu SNMP na ''Włączone''.<br>

	<!--T:9-->		<!--T:9-->
	'''~~Note~~:~~''' Loading an~~ SNMP ~~configuration file with a name other than~~ ''snmpd.conf'' ~~will result in an unresponsive modem~~.		''Uwaga'': Wczytanie pliku konfiguracyjnego SNMP o nazwie innej niż ''snmpd.conf'', będzie skutkowało brakiem reakcji modemu.

	==SNMP ~~configuration file generation~~== <!--T:10-->		==Generowanie pliku konfiguracyjnego SNMP== <!--T:10-->

	<!--T:11-->		<!--T:11-->
	'''~~Note~~:~~''' The~~ Elproma Smart Manager ~~application only provides a simple~~ SNMP ~~file generator function and is not a sophisticated tool~~. ~~With the generator, it is possible to generate a configuration file template~~, ~~which will allo w the~~ SNMP ~~module to be started quickly~~.		''Uwaga'': Aplikacja Elproma Smart Manager udostępnia jedynie prostą funkcję generatora plików SNMP. Dzięki generatorowi możliwe jest wygenerowanie wzoru pliku konfiguracyjnego, który pozowali na szybkie uruchomienie modułu SNMP.

	<!--T:12-->		<!--T:12-->
Linia 39:		Linia 39:

	<!--T:13-->		<!--T:13-->
	'''~~Button description~~:'''		'''Opis przycisków:'''

	<!--T:14-->		<!--T:14-->
	1. ~~Add~~ SNMPv2c community string, IP ~~and trap~~ port.<br>		1. Dodaj SNMPv2c community string, IP oraz port pułapki.<br>
	2. ~~Edit~~ SNMPv2c community string, IP ~~and trap~~ port.<br>		2. Edytuj SNMPv2c community string, IP oraz port pułapki.<br>
	3. ~~Remove the~~ community string ~~from the list~~.<br>		3. Usun community string z listy.<br>
	4. ~~Add~~ SNMPv3 ~~user profile~~.<br>		4. Dodaj profil uz ytkownika SNMPv3.<br>
	5. ~~Edit~~ SNMPv3 ~~user profile~~.<br>		5. Edytuj profil uz ytkownika SNMPv3.<br>
	6. ~~Remove~~ SNMPv3 ~~user profile from the list~~.<br>		6. Usun profil uz ytkownika SNMPv3 z listy.<br>
	7. ~~Generate configuration file~~.<br>		7. Generuj plik konfiguracyjny.<br>

	<!--T:15-->		<!--T:15-->
	'''~~How~~ do ~~I add an SNMPv2c configuration to a file~~?'''		'''Jak dodać konfigurację SNMPv2c do pliku?'''

	<!--T:16-->		<!--T:16-->
	1. ~~In the~~ SNMP v2c ~~field~~, ~~click~~ ''~~Add~~''.<br>		1. W polu ''SNMP v2c'', kliknij ''Dodaj''.<br>
	2. ~~Fill in the fields in the configuration window with the~~ community string ~~and the~~ IP ~~and port of the trap~~.		2. Wypełnij pola w oknie konfiguracyjnym podając ''community string'' oraz ''IP pułapki'' i ''Port pułapki''.

	<!--T:17-->		<!--T:17-->
Linia 61:		Linia 61:

	<!--T:18-->		<!--T:18-->
	3. ~~Accept the data entered using the~~ ''~~Save~~'' ~~button~~. ~~After this operation, the item should appear in the list in the~~ SNMP v2c ~~field~~.		3. Zaakceptuj wprowadzone dane za pomocą przycisku ''Zapisz''. Po tej operacji pozycja powinna pokazać się na liście w polu ''SNMP v2c''.

	<!--T:19-->		<!--T:19-->
	'''~~How do I add the~~ SNMP v3 ~~configuration to the file~~?'''		'''Jak dodać konfigurację SNMP v3 do pliku?'''

	<!--T:20-->		<!--T:20-->
	1. ~~In the~~ SNMP v3 ~~Users field~~, ~~click~~ ''~~Add~~''.<br>		1. W polu ''SNMP v3 Użytkownicy'', kliknij ''Dodaj''.<br>
	2. ~~Fill in the fields in the configuration window~~.		2. Wypełnij pola w oknie konfiguracyjnym.

	<!--T:21-->		<!--T:21-->
Linia 74:		Linia 74:

	<!--T:22-->		<!--T:22-->
	3. ~~Accept the data entered with the~~ ''~~Save~~'' ~~button~~. ~~After this operation, the entry should appear in the list in the field~~ SNMP v3 ~~Users~~.		3. Zaakceptuj wprowadzone dane za pomocą przycisku ''Zapisz''. Po tej operacji pozycja powinna pokazać się na liście w polu ''SNMP v3 Użytkownicy''.

	<!--T:23-->		<!--T:23-->
	'''~~How do I generate the configuration file~~?'''		'''Jak wygenerować plik konfiguracyjny?'''

	<!--T:24-->		<!--T:24-->
	1. ~~After completing the fields of the configurator, it is possible to generate the file using~~ ''~~Generate~~'' ~~button~~<br>		1. Po uzupełnieniu pól konfiguratora możliwe jest wygenerowanie pliku za pomocą przycisku ''Generuj''.<br>
	2. ~~Then select the location where the configuration file will be saved~~.<br>		2. Następnie należy wybrać lokalizację, gdzie zostanie zapisany plik konfiguracyjny.<br>
	3. ~~Once the file has been generated, a preview~~ (~~in read mode~~) ~~will be displayed in the generator window~~.		3. Po wygenerowaniu pliku podgląd (w trybie odczytu) zostanie wyświetlony w oknie generatora.<br>

	</translate>		</translate>

	[[Category:Elproma Smart Manager User Manual]]		[[Category:Elproma Smart Manager User Manual]]

Elproma o 11:31, 9 sie 2023

2023-08-09T11:31:28Z

← poprzednia wersja		Wersja z 13:31, 9 sie 2023
Linia 2:		Linia 2:
	<translate>		<translate>
	<!--T:1-->		<!--T:1-->
	~~In the~~ SNMP ~~tab, it is possible to manage the~~ SNMP ~~module and to generate a simple~~ SNMP ~~configuration file to be loaded into the modem~~.		W zakładce ''SNMP'' możliwa jest zarzadzanie modułem SNMP oraz generowanie prostego pliku konfiguracyjnego SNMP, który musi zostać wczytany do modemu.

	<!--T:2-->		<!--T:2-->

Elproma: Oznaczono tę wersję do tłumaczenia

2023-08-09T11:29:32Z

Oznaczono tę wersję do tłumaczenia

← poprzednia wersja		Wersja z 13:29, 9 sie 2023
Linia 1:		Linia 1:
	<languages/>		<languages/>
	<translate>		<translate>
			<!--T:1-->
	In the SNMP tab, it is possible to manage the SNMP module and to generate a simple SNMP configuration file to be loaded into the modem.		In the SNMP tab, it is possible to manage the SNMP module and to generate a simple SNMP configuration file to be loaded into the modem.

			<!--T:2-->
	[[File:ESM_snmp.png\|800px]]		[[File:ESM_snmp.png\|800px]]

	==SNMP Control==		==SNMP Control== <!--T:3-->

			<!--T:4-->
	[[File:ESM_snmpcontrol.png\|350px]]		[[File:ESM_snmpcontrol.png\|350px]]

			<!--T:5-->
	'''Button description:'''		'''Button description:'''

			<!--T:6-->
	1. Enable/Disable the SNMP module on the modem.<br>		1. Enable/Disable the SNMP module on the modem.<br>
	2. Load the SNMP configuration file.<br>		2. Load the SNMP configuration file.<br>
	3. Delete the configuration from the modem. Deleting the configuration from the modem also results in automatic deactivation of the SNMP module in the modem.<br>		3. Delete the configuration from the modem. Deleting the configuration from the modem also results in automatic deactivation of the SNMP module in the modem.<br>

			<!--T:7-->
	'''How do I start the SNMP module?'''		'''How do I start the SNMP module?'''

			<!--T:8-->
	1. Load a configuration file into the modem. The SNMP configuration file should be named ''snmpd.conf''. Correctly loading the file will result in the SNMP configuration status changing to ''Loaded''.<br>		1. Load a configuration file into the modem. The SNMP configuration file should be named ''snmpd.conf''. Correctly loading the file will result in the SNMP configuration status changing to ''Loaded''.<br>
	2. Next, use the button marked ''1'' to enable the SNMP module on the modem. Correctly enabling the SNMP module will result in the SNMP status changing to ''Enabled''.<br>		2. Next, use the button marked ''1'' to enable the SNMP module on the modem. Correctly enabling the SNMP module will result in the SNMP status changing to ''Enabled''.<br>

			<!--T:9-->
	'''Note:''' Loading an SNMP configuration file with a name other than ''snmpd.conf'' will result in an unresponsive modem.		'''Note:''' Loading an SNMP configuration file with a name other than ''snmpd.conf'' will result in an unresponsive modem.

	==SNMP configuration file generation==		==SNMP configuration file generation== <!--T:10-->

			<!--T:11-->
	'''Note:''' The Elproma Smart Manager application only provides a simple SNMP file generator function and is not a sophisticated tool. With the generator, it is possible to generate a configuration file template, which will allo w the SNMP module to be started quickly.		'''Note:''' The Elproma Smart Manager application only provides a simple SNMP file generator function and is not a sophisticated tool. With the generator, it is possible to generate a configuration file template, which will allo w the SNMP module to be started quickly.

			<!--T:12-->
	[[File:ESM_snmpconfiguration.png\|800px]]		[[File:ESM_snmpconfiguration.png\|800px]]

			<!--T:13-->
	'''Button description:'''		'''Button description:'''

			<!--T:14-->
	1. Add SNMPv2c community string, IP and trap port.<br>		1. Add SNMPv2c community string, IP and trap port.<br>
	2. Edit SNMPv2c community string, IP and trap port.<br>		2. Edit SNMPv2c community string, IP and trap port.<br>
Linia 38:		Linia 50:
	7. Generate configuration file.<br>		7. Generate configuration file.<br>

			<!--T:15-->
	'''How do I add an SNMPv2c configuration to a file?'''		'''How do I add an SNMPv2c configuration to a file?'''

			<!--T:16-->
	1. In the SNMP v2c field, click ''Add''.<br>		1. In the SNMP v2c field, click ''Add''.<br>
	2. Fill in the fields in the configuration window with the community string and the IP and port of the trap.		2. Fill in the fields in the configuration window with the community string and the IP and port of the trap.

			<!--T:17-->
	[[File:ESM_snmpconfigurationaddv2c.png\|300px]]		[[File:ESM_snmpconfigurationaddv2c.png\|300px]]

			<!--T:18-->
	3. Accept the data entered using the ''Save'' button. After this operation, the item should appear in the list in the SNMP v2c field.		3. Accept the data entered using the ''Save'' button. After this operation, the item should appear in the list in the SNMP v2c field.

			<!--T:19-->
	'''How do I add the SNMP v3 configuration to the file?'''		'''How do I add the SNMP v3 configuration to the file?'''

			<!--T:20-->
	1. In the SNMP v3 Users field, click ''Add''.<br>		1. In the SNMP v3 Users field, click ''Add''.<br>
	2. Fill in the fields in the configuration window.		2. Fill in the fields in the configuration window.

			<!--T:21-->
	[[File:ESM_snmpconfigurationaddv3.png\|300px]]		[[File:ESM_snmpconfigurationaddv3.png\|300px]]

			<!--T:22-->
	3. Accept the data entered with the ''Save'' button. After this operation, the entry should appear in the list in the field SNMP v3 Users.		3. Accept the data entered with the ''Save'' button. After this operation, the entry should appear in the list in the field SNMP v3 Users.

			<!--T:23-->
	'''How do I generate the configuration file?'''		'''How do I generate the configuration file?'''

			<!--T:24-->
	1. After completing the fields of the configurator, it is possible to generate the file using ''Generate'' button<br>		1. After completing the fields of the configurator, it is possible to generate the file using ''Generate'' button<br>
	2. Then select the location where the configuration file will be saved.<br>		2. Then select the location where the configuration file will be saved.<br>

Elproma o 11:24, 9 sie 2023

2023-08-09T11:24:34Z

← poprzednia wersja		Wersja z 13:24, 9 sie 2023
Linia 1:		Linia 1:
			<languages/>
			<translate>
	In the SNMP tab, it is possible to manage the SNMP module and to generate a simple SNMP configuration file to be loaded into the modem.		In the SNMP tab, it is possible to manage the SNMP module and to generate a simple SNMP configuration file to be loaded into the modem.

Linia 59:		Linia 61:
	2. Then select the location where the configuration file will be saved.<br>		2. Then select the location where the configuration file will be saved.<br>
	3. Once the file has been generated, a preview (in read mode) will be displayed in the generator window.		3. Once the file has been generated, a preview (in read mode) will be displayed in the generator window.

			</translate>

	[[Category:Elproma Smart Manager User Manual]]		[[Category:Elproma Smart Manager User Manual]]

Elproma o 08:03, 3 sie 2023

2023-08-03T08:03:10Z

← poprzednia wersja		Wersja z 10:03, 3 sie 2023
Linia 59:		Linia 59:
	2. Then select the location where the configuration file will be saved.<br>		2. Then select the location where the configuration file will be saved.<br>
	3. Once the file has been generated, a preview (in read mode) will be displayed in the generator window.		3. Once the file has been generated, a preview (in read mode) will be displayed in the generator window.

			[[Category:Elproma Smart Manager User Manual]]

Elproma o 11:18, 2 sie 2023

2023-08-02T11:18:00Z

← poprzednia wersja		Wersja z 13:18, 2 sie 2023
Linia 15:		Linia 15:
	'''How do I start the SNMP module?'''		'''How do I start the SNMP module?'''

	1. Load a configuration file into the modem. The SNMP configuration file should be named "snmpd.conf". Correctly loading the file will result in the SNMP configuration status changing to "Loaded".<br>		1. Load a configuration file into the modem. The SNMP configuration file should be named ''snmpd.conf''. Correctly loading the file will result in the SNMP configuration status changing to ''Loaded''.<br>
	2. Next, use the button marked ''1'' to enable the SNMP module on the modem. Correctly enabling the SNMP module will result in the SNMP status changing to ''Enabled''.<br>		2. Next, use the button marked ''1'' to enable the SNMP module on the modem. Correctly enabling the SNMP module will result in the SNMP status changing to ''Enabled''.<br>

Elproma o 11:12, 2 sie 2023

2023-08-02T11:12:26Z

Elproma o 10:00, 31 lip 2023

2023-07-31T10:00:01Z

← poprzednia wersja		Wersja z 12:00, 31 lip 2023
Linia 38:		Linia 38:
	'''How do I add an SNMPv2c configuration to a file?'''		'''How do I add an SNMPv2c configuration to a file?'''

	1. In the SNMP v2c field, click "Add".		1. In the SNMP v2c field, click "Add".<br>
	2. Fill in the fields in the configuration window with the community string and the IP and port of the trap.		2. Fill in the fields in the configuration window with the community string and the IP and port of the trap.

Linia 47:		Linia 47:
	'''How do I add the SNMP v3 configuration to the file?'''		'''How do I add the SNMP v3 configuration to the file?'''

	1. In the SNMP v3 Users field, click "Add".		1. In the SNMP v3 Users field, click "Add".<br>
	2. Fill in the fi elds in the configuration window.		2. Fill in the fi elds in the configuration window.

Linia 56:		Linia 56:
	'''How do I generate the configuration file?'''		'''How do I generate the configuration file?'''

	1. After completing the fields of the configurator, it is possible to generate the file using the "Generate"		1. After completing the fields of the configurator, it is possible to generate the file using the "Generate"<br>
	2. Then select the location where the configuration file will be saved.		2. Then select the location where the configuration file will be saved.<br>
	3. Once the file has been generated, a preview (in read mode) will be displayed in the generator window.		3. Once the file has been generated, a preview (in read mode) will be displayed in the generator window.

Elproma o 09:58, 31 lip 2023

2023-07-31T09:58:47Z

← poprzednia wersja		Wersja z 11:58, 31 lip 2023
Linia 24:		Linia 24:
	'''Note:''' The Elproma Smart Manager application only provides a simple SNMP file generator function and is not a sophisticated tool. With the generator, it is possible to generate a configuration file template, which will allo w the SNMP module to be started quickly.		'''Note:''' The Elproma Smart Manager application only provides a simple SNMP file generator function and is not a sophisticated tool. With the generator, it is possible to generate a configuration file template, which will allo w the SNMP module to be started quickly.

	[[File:ESM_snmpconfiguration.png\|~~600px~~]]		[[File:ESM_snmpconfiguration.png\|800px]]

	'''Button description:'''		'''Button description:'''

Elproma o 09:57, 31 lip 2023

2023-07-31T09:57:03Z

← poprzednia wersja		Wersja z 11:57, 31 lip 2023
Linia 41:		Linia 41:
	2. Fill in the fields in the configuration window with the community string and the IP and port of the trap.		2. Fill in the fields in the configuration window with the community string and the IP and port of the trap.

	[[File:ESM_snmpconfigurationaddv2c.png\|~~400px~~]]		[[File:ESM_snmpconfigurationaddv2c.png\|300px]]

	3. Accept the data entered using the "Save" button. After this operation, the item should appear in the list in the SNMP v2c field.		3. Accept the data entered using the "Save" button. After this operation, the item should appear in the list in the SNMP v2c field.
Linia 50:		Linia 50:
	2. Fill in the fi elds in the configuration window.		2. Fill in the fi elds in the configuration window.

	[[File:ESM_snmpconfigurationaddv3.png\|~~400px~~]]		[[File:ESM_snmpconfigurationaddv3.png\|300px]]

	3. Accept the data entered with the 'Save' button. After this operation, the entry should appear in the list in the field SNMP v3 Users.		3. Accept the data entered with the 'Save' button. After this operation, the entry should appear in the list in the field SNMP v3 Users.

← poprzednia wersja		Wersja z 13:12, 2 sie 2023
Linia 16:		Linia 16:

	1. Load a configuration file into the modem. The SNMP configuration file should be named "snmpd.conf". Correctly loading the file will result in the SNMP configuration status changing to "Loaded".<br>		1. Load a configuration file into the modem. The SNMP configuration file should be named "snmpd.conf". Correctly loading the file will result in the SNMP configuration status changing to "Loaded".<br>
	2. Next, use the ~~butto n~~ marked 1 to enable the SNMP module on the modem. Correctly enabling the SNMP module will result in the SNMP status changing to "Enabled".<br>		2. Next, use the button marked ''1'' to enable the SNMP module on the modem. Correctly enabling the SNMP module will result in the SNMP status changing to ''Enabled''.<br>

	'''Note:''' Loading an SNMP configuration file with a name other than "snmpd.conf" will result in an unresponsive modem.		'''Note:''' Loading an SNMP configuration file with a name other than ''snmpd.conf'' will result in an unresponsive modem.

	==SNMP configuration file generation==		==SNMP configuration file generation==
Linia 38:		Linia 38:
	'''How do I add an SNMPv2c configuration to a file?'''		'''How do I add an SNMPv2c configuration to a file?'''

	1. In the SNMP v2c field, click "Add".<br>		1. In the SNMP v2c field, click ''Add''.<br>
	2. Fill in the fields in the configuration window with the community string and the IP and port of the trap.		2. Fill in the fields in the configuration window with the community string and the IP and port of the trap.

	[[File:ESM_snmpconfigurationaddv2c.png\|300px]]		[[File:ESM_snmpconfigurationaddv2c.png\|300px]]

	3. Accept the data entered using the "Save" button. After this operation, the item should appear in the list in the SNMP v2c field.		3. Accept the data entered using the ''Save'' button. After this operation, the item should appear in the list in the SNMP v2c field.

	'''How do I add the SNMP v3 configuration to the file?'''		'''How do I add the SNMP v3 configuration to the file?'''

	1. In the SNMP v3 Users field, click "Add".<br>		1. In the SNMP v3 Users field, click ''Add''.<br>
	2. Fill in the ~~fi elds~~ in the configuration window.		2. Fill in the fields in the configuration window.

	[[File:ESM_snmpconfigurationaddv3.png\|300px]]		[[File:ESM_snmpconfigurationaddv3.png\|300px]]

	3. Accept the data entered with the 'Save' button. After this operation, the entry should appear in the list in the field SNMP v3 Users.		3. Accept the data entered with the ''Save'' button. After this operation, the entry should appear in the list in the field SNMP v3 Users.

	'''How do I generate the configuration file?'''		'''How do I generate the configuration file?'''

	1. After completing the fields of the configurator, it is possible to generate the file using ~~the "~~Generate"<br>		1. After completing the fields of the configurator, it is possible to generate the file using ''Generate'' button<br>
	2. Then select the location where the configuration file will be saved.<br>		2. Then select the location where the configuration file will be saved.<br>
	3. Once the file has been generated, a preview (in read mode) will be displayed in the generator window.		3. Once the file has been generated, a preview (in read mode) will be displayed in the generator window.