NTS-pico3 Device monitoring

Monitoring GNSS satellite signals ON-LINE

To monitor GNSS signals SSH communication must be enabled first. Please execute the following commands from terminal:

ssh root@192.168.1.234 -p 65535
root@192.168.1.139's password: 12345
[root@rbmtx ~]# TERM=vt220
[root@rbmtx ~]# gpsmon

This screen is the tool to monitor GNSS (GPS & Glonass) satellite signal performance. You should be able to receive signals from at least not less than 4 satellites. Well done installation mostly let view 10-20 GNSS satellites in view. It takes approx. 5-10 minutes since power on to get minimum #sats in view.

Recommendation!

For Linux/Unix and Mac OSX please use BASH std. terminal.

For Microsoft Windows there are various of 3rd party SSH software suppliers. One of the most popular one is free available putty

Monitoring NTP on-line

To monitor NTP, SSH communication must be enabled first. Please execute the following commands from terminal:

ssh root@192.168.1.234 -p 65535
root@192.168.1.139's password: 12345
[root@rbmtx ~]# ntpq

You can use full spectrum of std. NTP monitoring tools incl. ntpq and ntpdc to trace and monitor Network Time Protocol. For more information please refer to www.ntp.org