Szablon: Connectors: Różnice pomiędzy wersjami
Z Elproma Wiki Knowledge Base
Znacznik: Ręczne wycofanie zmian |
|||
| Linia 195: | Linia 195: | ||
{{!}} 8 | {{!}} 8 | ||
{{!}}} | {{!}}} | ||
| NTS-pico3 = Available modes for RS232: | |||
* None. | |||
* Forwarding. | |||
* Terminal – Unlocks standard SSH like console on serial port. | |||
* ModBus gateway. | |||
* GPS NMEA – copies NMEA output from GNSS module and sends it to serial port. Included messages are: RMC, GSV, GSA, GGA. | |||
* PTP NMEA – simulates NMEA messages based on PTP synchronization status. Requires PTP to be enabled. Included messages are: RMC, ZDA. | |||
===LAN connector=== | | RBMTX-Lite|NTS-pico3 = ===LAN connector=== | ||
Second RJ-45 connector (marked as "LAN") is placed next to serial connector and is used for communication with PC or laptop through Ethernet interface. WWW configuration is available in the web browser (default IP address is 192.168.1.234). You can change the default address in [[{{{model}}}_QuickSetup]]. | Second RJ-45 connector (marked as "LAN") is placed next to serial connector and is used for communication with PC or laptop through Ethernet interface. WWW configuration is available in the web browser (default IP address is 192.168.1.234). You can change the default address in [[{{{model}}}_QuickSetup]]. | ||
Wersja z 14:31, 16 maj 2023
This page contains connectors description of {{{model}}} {{{type}}}.
Power supply connector
Antenna connectors
GSM antenna connector
Interfaces
[[Category:{{{model}}} User Manual]]