NTS-pico3 General

Technical Specification

Holdover OSC	TCXO
Supported synchronization protocols	NTP, PTP IEEE1588
NTP	RFC5905, RFC1305, RFC5906, RFC5907, RFC5908, RFC5909
SNTP	RFC4330, RFC2030, RFC1769
PTP	IEEE1588: 2008
1PPS output	1x SMA*
1PPS specification	PPS out - 3.3 VDC (50 Ohm) Pulse width - 1ms The PPS-out either directly from GNSS module or PTP.
Time/Daytime	RFC(867-8)*
LAN interfaces	10/100 Mbps (RJ45) x 1
Supported TCP/IP protocols	IPv4, IPv6*, TCP, UDP
Management	HTTP, HTTPS, SSH, TELNET
Security	Autokey, DSA, SSL, MD5, RSA
SYSLOG	yes
Hardware stamping	accuracy < 200 ns*
Antenna interface	1x SMA
Supported GNSS	GPS, GLONASS
Additional supported GNSS	GALILLEO*, BEIDOU*
SBAS	EGNOS, WAAS, GAGAN
FREQ #1	1575.42MHz (L1 GPS)
FREQ #2	1598.06-1605.38MHz GLONASS
Max concurrent GNSS channels	32
Antenna cable	30m coax H155
RS232 connector type	1x RJ45
USB interface	1x Micro-USB 2.0
Size	79 x 53,5 x 26 mm
Weight	0.3 kg (3kg with all equipment)
Operating temperature	(-20 °C … +70 °C)
Storage temperature	(-40 °C … +85 °C)
Humidity	up to 95 %
Power	9-30 VDC
Power consumption	* Typical: 1.2-1.6 W (100-140 mA for 12 V) Max typical: < 2 W (Peak when active GNSS antenna is not shorted and USB not connected), max. 170 mA for 12 V. Max. possible: < 8 W (info for safety, when short-circuit on internal 5 V), max. 700 mA for 12 V.

* - extra feature