Szablon: Web quicksetup: Różnice pomiędzy wersjami

Z Elproma Wiki Knowledge Base
Skocz do: nawigacja, szukaj
Linia 91: Linia 91:


AT Interface tab is used to manage the modem over serial port (RS232 or RS485).
AT Interface tab is used to manage the modem over serial port (RS232 or RS485).
{| class="wikitable"
{{{!}} class="wikitable"
|-
{{!}}-
   ! Name
   ! Name
   ! Value
   ! Value
   ! Description
   ! Description
|-
{{!}}-
   | Enabled
   {{!}} Enabled
   | On/Off. Default: On
   {{!}} On/Off. Default: On
   | Activate or deactivate modem managing
   {{!}} Activate or deactivate modem managing
|-
{{!}}-
   | Serial port
   {{!}} Serial port
   | RS232 or RS485. Default: RS232
   {{!}} RS232 or RS485. Default: RS232
   | Choose the serial interface
   {{!}} Choose the serial interface
|-
{{!}}-
   | Baudrate
   {{!}} Baudrate
   | 9600, 14400, 19200, 38400, 57600, 115200, 128000, 256000 or 512000. Default: 115200
   {{!}} 9600, 14400, 19200, 38400, 57600, 115200, 128000, 256000 or 512000. Default: 115200
   | Serial baud rate
   {{!}} Serial baud rate
|-
{{!}}
   | Databits
   {{!}} Databits
   | 5, 6, 7 or 8. Default: 8
   {{!}} 5, 6, 7 or 8. Default: 8
   | Serial data bits
   {{!}} Serial data bits
|-
{{!}}-
   | Parity
   {{!}} Parity
   | None, Even or Odd. Default: None
   {{!}} None, Even or Odd. Default: None
   | Serial parity
   {{!}} Serial parity
|-
{{!}}-
   | Stopbits
   {{!}} Stopbits
   | 1 or 2. Default: 1
   {{!}} 1 or 2. Default: 1
   | Serial stop bits
   {{!}} Serial stop bits
|}
{{!}}}
}}
}}


Linia 126: Linia 126:


Bands & Frequencies tab is used to manage the modem bands (2G, 3G and 4G) and set module LTE frequencies.
Bands & Frequencies tab is used to manage the modem bands (2G, 3G and 4G) and set module LTE frequencies.
{| class="wikitable"
{{{!}} class="wikitable"
|-
{{!}}-
   ! Name
   ! Name
   ! Value
   ! Value
   ! Description
   ! Description
|-
{{!}}-
   | LTE/3G/2G
   {{!}} LTE/3G/2G
   | 2G, 3G, 4G, 2G>3G, 3G>2G, 4G>3G, 3G>4G, 4G>2G, 2G>4G, 4G>3G>2G or 2G>3G>4G. Default: 4G>3G>2G
   {{!}} 2G, 3G, 4G, 2G>3G, 3G>2G, 4G>3G, 3G>4G, 4G>2G, 2G>4G, 4G>3G>2G or 2G>3G>4G. Default: 4G>3G>2G
   | Force the modem band. E.g. when "2G>4G" mode is selected, modem will try to login to the network using 2G band first, then to 4G.
   {{!}} Force the modem band. E.g. when "2G>4G" mode is selected, modem will try to login to the network using 2G band first, then to 4G.
|-
{{!}}-
   | LTE frequencies
   {{!}} LTE frequencies
   | Europe/USA. Default: Europe
   {{!}} Europe/USA. Default: Europe
   | Set LTE frequencies region
   {{!}} Set LTE frequencies region
|}
|}
{{#ifeq: {{{model}}} | RBMTX-Lite | ===SIM switching===
{{#ifeq: {{{model}}} | RBMTX-Lite | ===SIM switching===


SIM switching tab is used to manage the SIM cards switching rules.
SIM switching tab is used to manage the SIM cards switching rules.
{| class="wikitable"
{{{!}} class="wikitable"
|-
{{!}}-
   ! Name
   ! Name
   ! Value
   ! Value
   ! Description
   ! Description
|-
{{!}}-
   | SIM card active on startup
   {{!}} SIM card active on startup
   | SIM1 (external) or SIM2 (hidden). Default: SIM1 (external)
   {{!}} SIM1 (external) or SIM2 (hidden). Default: SIM1 (external)
   | Forces which SIM card to use at startup
   {{!}} Forces which SIM card to use at startup
|-
{{!}}-
   | Change SIM when mobile network not available ...
   {{!}} Change SIM when mobile network not available ...
   | Never change, after 30 sec, after 90 sec, after 3 min, after 5 min, after 15 min, after 30 minor after 6 hours. Default: Never change
   {{!}} Never change, after 30 sec, after 90 sec, after 3 min, after 5 min, after 15 min, after 30 minor after 6 hours. Default: Never change
   | Sets the time after which it will switch the SIM card when network is not available
   {{!}} Sets the time after which it will switch the SIM card when network is not available
|}
{{!}}}
}}
}}
{{#ifeq: {{{model}}} | RBMTX-Lite | ==Modbus TCP/IP Gateway==
{{#ifeq: {{{model}}} | RBMTX-Lite | ==Modbus TCP/IP Gateway==
Linia 164: Linia 164:
{{#ifeq: {{{model}}} | RBMTX-Lite | ===Modbus TCP/IP===
{{#ifeq: {{{model}}} | RBMTX-Lite | ===Modbus TCP/IP===


{| class="wikitable"
{{{!}} class="wikitable"
|-
{{!}}-
   ! Name
   ! Name
   ! Value
   ! Value
   ! Description
   ! Description
|-
{{!}}-
   | Modbus GW/Terminal
   {{!}} Modbus GW/Terminal
   | Terminal (Modbus disabled) or Modbus Gateway enabled Default: Terminal (Modbus disabled)
   {{!}} Terminal (Modbus disabled) or Modbus Gateway enabled Default: Terminal (Modbus disabled)
   | Set Terminal od Modbus gateway on serial port interface
   {{!}} Set Terminal od Modbus gateway on serial port interface
|-
{{!}}-
   | serial port
   {{!}} serial port
   | RS232 or RS485. Default: RS232
   {{!}} RS232 or RS485. Default: RS232
   | Choose the serial interface
   {{!}} Choose the serial interface
|-
{{!}}-
   | TCP/IP port
   {{!}} TCP/IP port
   | Number from 1024 to 49151. Default: 9000
   {{!}} Number from 1024 to 49151. Default: 9000
   | Sets the TCP/IP port
   {{!}} Sets the TCP/IP port
|-
{{!}}-
   | Baudrate
   {{!}} Baudrate
   | 9600, 14400, 19200, 38400, 57600, 115200, 128000, 256000 or 512000. Default: 115200
   {{!}} 9600, 14400, 19200, 38400, 57600, 115200, 128000, 256000 or 512000. Default: 115200
   | Serial baud rate
   {{!}} Serial baud rate
|-
{{!}}-
   | Databits
   {{!}} Databits
   | 5, 6, 7 or 8. Default: 8
   {{!}} 5, 6, 7 or 8. Default: 8
   | Serial data bits
   {{!}} Serial data bits
|-
{{!}}-
   | Parity
   {{!}} Parity
   | None, Even or Odd. Default: None
   {{!}} None, Even or Odd. Default: None
   | Serial parity
   {{!}} Serial parity
|-
{{!}}-
   | Stopbits
   {{!}} Stopbits
   | 1 or 2. Default: 1
   {{!}} 1 or 2. Default: 1
   | Serial stop bits
   {{!}} Serial stop bits
|}
{{!}}}
}}
}}


{{#ifeq: {{{model}}} | RBMTX-Lite | ==Advanced modbus settings==
{{#ifeq: {{{model}}} | RBMTX-Lite | ==Advanced modbus settings==
Section for setting additional modbus settings.
Section for setting additional modbus settings.
{| class="wikitable"
{{{!}} class="wikitable"
|-
{{!}}-
   ! Name
   ! Name
   ! Value
   ! Value
   ! Description
   ! Description
|-
{{!}}-
   | Timeout
   {{!}} Timeout
   | Number [sec]. Default: None
   {{!}} Number [sec]. Default: None
   | Modbus timeout
   {{!}} Modbus timeout
|-
{{!}}-
   | Pause
   {{!}} Pause
   | Number [sec]. Default: None
   {{!}} Number [sec]. Default: None
   | Pause time
   {{!}} Pause time
|}
{{!}}}
}}
}}


[[Category:{{{model}}} User Manual]]
[[Category:{{{model}}} User Manual]]

Wersja z 15:31, 18 kwi 2024

The QuickSetup page of {{{model}}} {{{type}}} is used to set the main functions of the device.

Local Area Network

In Local Area Network section you can set local IP address and IP netmask of the {{{model}}}. IP netmask must be entered in CIDR notation.

Web ipchange.png

IP address change

To change the IP address:

  • Write new address and use green "+" button.

Web ipchange 2.png

  • Save settings and wait for "Configuration changes applied." message.
  • Delete "old" IP address by using red "x" button.
  • Save settings, wait a while and type new address in the web browser.

Modem/GSM network

The Modem/GSM network section is used to configure the modem settings.

SIM1

The SIM1 tab is used to configure external (main, master) SIM card parameters (in other words, how modem will establish the mobile connection).

Name Value Description
APN string, default: internet An Access Point Name (APN) is the name of a gateway between a GSM, GPRS, 3G and 4G mobile network and another computer network, frequently the public Internet.
PIN 4-digit number A personal identification number (PIN), or sometimes redundantly a PIN number or PIN code, is a numeric (sometimes alpha-numeric) passcode used in the process of authenticating a user accessing a system.
user string APN username used in connection authentication
password string APN password used in connection authentication



Bands & Frequencies

Bands & Frequencies tab is used to manage the modem bands (2G, 3G and 4G) and set module LTE frequencies.

Name Value Description
LTE/3G/2G 2G, 3G, 4G, 2G>3G, 3G>2G, 4G>3G, 3G>4G, 4G>2G, 2G>4G, 4G>3G>2G or 2G>3G>4G. Default: 4G>3G>2G Force the modem band. E.g. when "2G>4G" mode is selected, modem will try to login to the network using 2G band first, then to 4G.
LTE frequencies Europe/USA. Default: Europe Set LTE frequencies region




[[Category:{{{model}}} User Manual]]

Źródło: „http://wiki.elpromaelectronics.com/index.php?title=Szablon:Web_quicksetup&oldid=214705”