Szablon: Web quicksetup: Różnice pomiędzy wersjami

Z Elproma Wiki Knowledge Base
Skocz do: nawigacja, szukaj
 
(Nie pokazano 15 pośrednich wersji utworzonych przez tego samego użytkownika)
Linia 1: Linia 1:
The <b>QuickSetup</b> page of {{{model}}} router is used to set the main functions of the device.
The <b>QuickSetup</b> page of {{{model}}} {{{type}}} is used to set the main functions of the device.


==Local Area Network==
==Local Area Network==
In <b>Local Area Network</b> section you can set local IP address and IP netmask of the {{{model}}}. IP netmask must be entered in [[wikipedia:CIDR|CIDR]] notation.
In <b>Local Area Network</b> section you can set local IP address and IP netmask of the {{{model}}}. IP netmask must be entered in [[wikipedia:CIDR|CIDR]] notation.
[[File:web_ipchange.png|400px]]
===IP address change===
To change the IP address:
* Write new address and use green "+" button.
[[File:web_ipchange_2.png|400px]]
* Save settings and wait for "Configuration changes applied." message.
* Delete "old" IP address by using red "x" button.
* Save settings, wait a while and type new address in the web browser.


==Modem/GSM network==
==Modem/GSM network==
The <b>Modem/GSM network</b> section is used to configure the modem settings.
The <b>Modem/GSM network</b> section is used to configure the modem settings.


===SIM1===
===SIM1===
The SIM1 tab is used to configure external (main, master) SIM card parameters (in other words, how modem will establish the mobile connection).
The SIM1 tab is used to configure external (main, master) SIM card parameters (in other words, how modem will establish the mobile connection).


<table>
<table class="table table-condensed">
     <tr>
     <tr>
         <th>Name</th>
         <th>Name</th>
Linia 39: Linia 55:
</table>
</table>


{{#ifeq: {{{model}}} | RBMTX-Lite | ===SIM2===


===SIM2===
The SIM2 tab is used to configure internal (second, slave) SIM card parameters (in other words, how modem will establish the mobile connection).
The SIM2 tab is used to configure internal (second, slave) SIM card parameters (in other words, how modem will establish the mobile connection).


Linia 71: Linia 87:
     </tr>
     </tr>
</table>
</table>
}}
{{#ifeq: {{{model}}} | RBMTX-Lite | ===AT Interface===


===AT Interface===
AT Interface tab is used to manage the modem over serial port (RS232 or RS485).
{{{!}} class="wikitable"
{{!}}-
  ! Name
  ! Value
  ! Description
{{!}}-
  {{!}} Enabled
  {{!}} On/Off. Default: On
  {{!}} Activate or deactivate modem managing
{{!}}-
  {{!}} Serial port
  {{!}} RS232 or RS485. Default: RS232
  {{!}} Choose the serial interface
{{!}}-
  {{!}} Baudrate
  {{!}} 9600, 14400, 19200, 38400, 57600, 115200, 128000, 256000 or 512000. Default: 115200
  {{!}} Serial baud rate
{{!}}
  {{!}} Databits
  {{!}} 5, 6, 7 or 8. Default: 8
  {{!}} Serial data bits
{{!}}-
  {{!}} Parity
  {{!}} None, Even or Odd. Default: None
  {{!}} Serial parity
{{!}}-
  {{!}} Stopbits
  {{!}} 1 or 2. Default: 1
  {{!}} Serial stop bits
{{!}}}
}}


===Bands & Frequencies===
===Bands & Frequencies===


===SIM switching===
Bands & Frequencies tab is used to manage the modem bands (2G, 3G and 4G) and set module LTE frequencies.
{{{!}} class="wikitable"
{{!}}-
  ! Name
  ! Value
  ! Description
{{!}}-
  {{!}} LTE/3G/2G
  {{!}} 2G, 3G, 4G, 2G>3G, 3G>2G, 4G>3G, 3G>4G, 4G>2G, 2G>4G, 4G>3G>2G or 2G>3G>4G. Default: 4G>3G>2G
  {{!}} Force the modem band. E.g. when "2G>4G" mode is selected, modem will try to login to the network using 2G band first, then to 4G.
{{!}}-
  {{!}} LTE frequencies
  {{!}} Europe/USA. Default: Europe
  {{!}} Set LTE frequencies region
|}
{{#ifeq: {{{model}}} | RBMTX-Lite | ===SIM switching===
 
SIM switching tab is used to manage the SIM cards switching rules.
{{{!}} class="wikitable"
{{!}}-
  ! Name
  ! Value
  ! Description
{{!}}-
  {{!}} SIM card active on startup
  {{!}} SIM1 (external) or SIM2 (hidden). Default: SIM1 (external)
  {{!}} Forces which SIM card to use at startup
{{!}}-
  {{!}} Change SIM when mobile network not available ...
  {{!}} Never change, after 30 sec, after 90 sec, after 3 min, after 5 min, after 15 min, after 30 minor after 6 hours. Default: Never change
  {{!}} Sets the time after which it will switch the SIM card when network is not available
{{!}}}
}}
{{#ifeq: {{{model}}} | RBMTX-Lite | ==Modbus TCP/IP Gateway==
 
In <b>Modbus TCP/IP Gateway</b> section you can set MODBUS gateway configuration for monitoring {{{model}}} {{{type}}}s.
}}
{{#ifeq: {{{model}}} | RBMTX-Lite | ===Modbus TCP/IP===
 
{{{!}} class="wikitable"
{{!}}-
  ! Name
  ! Value
  ! Description
{{!}}-
  {{!}} Modbus GW/Terminal
  {{!}} Terminal (Modbus disabled) or Modbus Gateway enabled Default: Terminal (Modbus disabled)
  {{!}} Set Terminal or Modbus gateway on serial port interface
{{!}}-
  {{!}} serial port
  {{!}} RS232 or RS485. Default: RS232
  {{!}} Choose the serial interface
{{!}}-
  {{!}} TCP/IP port
  {{!}} Number from 1024 to 49151. Default: 9000
  {{!}} Sets the TCP/IP port
{{!}}-
  {{!}} Baudrate
  {{!}} 9600, 14400, 19200, 38400, 57600, 115200, 128000, 256000 or 512000. Default: 115200
  {{!}} Serial baud rate
{{!}}-
  {{!}} Databits
  {{!}} 5, 6, 7 or 8. Default: 8
  {{!}} Serial data bits
{{!}}-
  {{!}} Parity
  {{!}} None, Even or Odd. Default: None
  {{!}} Serial parity
{{!}}-
  {{!}} Stopbits
  {{!}} 1 or 2. Default: 1
  {{!}} Serial stop bits
{{!}}}
}}


{{#ifeq: {{{model}}} | RBMTX-Lite | ==Advanced modbus settings==
Section for setting additional modbus settings.
{{{!}} class="wikitable"
{{!}}-
  ! Name
  ! Value
  ! Description
{{!}}-
  {{!}} Timeout
  {{!}} Number [sec]. Default: None
  {{!}} Modbus timeout
{{!}}-
  {{!}} Pause
  {{!}} Number [sec]. Default: None
  {{!}} Pause time
{{!}}}
}}


==Modbus TCP/IP Gateway==
{{#ifeq: {{{model}}} | RB900SG-ElpOS | ==Serial Ports Configuration==
Here you can set MODBUS gateway or transparent communication interface on serial ports of {{{model}}} {{{type}}}.


[[File:web_serial_ports_configuration.png|400px]]


{{{!}} class="wikitable"
{{!}}-
  ! Name
  ! Value
  ! Description
{{!}}-
  {{!}} Enabled
  {{!}} Default: On
  {{!}} Enable or disable the function.
{{!}}-
  {{!}} Transparent/Modbus GW
  {{!}} Transparent interface or Modbus Gateway. Default: Transparent interface
  {{!}}
{{!}}-
  {{!}} RS232/RS422/RS485
  {{!}} RS232, RS422 or RS485. Default: RS232
  {{!}} Set serial interface
{{!}}-
  {{!}} Baudrate
  {{!}} 9600, 19200, 38400, 57600 or 115200. Default: 115200
  {{!}} Set serial baudrate
{{!}}-
  {{!}} Databits
  {{!}} Number between 5 and 8. Default: 8
  {{!}}
{{!}}-
  {{!}} Parity
  {{!}} None, Even or Odd. Default: Odd
  {{!}}
{{!}}-
  {{!}} Stopbits
  {{!}} Number between 1 and 2. Default: 1
  {{!}}
{{!}}-
  {{!}} Transparent interface settings: TCP/IP port
  {{!}} Number between 1 and 65535. Default: 2224
  {{!}} Port for TCP/IP communication.
{{!}}-
  {{!}} Modbus settings: TCP/IP port
  {{!}} Number between 1 and 65535. Default: 502
  {{!}} Port for MODBUS communication.
{{!}}-
  {{!}} Max Connections
  {{!}} Number. Default: 32
  {{!}}
{{!}}-
  {{!}} Timeout
  {{!}} Number. Default: 60
  {{!}}
{{!}}-
  {{!}} Pause
  {{!}} Number. Default: 250
  {{!}}
{{!}}-
  {{!}} wait
  {{!}} Number. Default: 250
  {{!}}
{{!}}-
  {{!}} retries
  {{!}} Number. Default: 3
  {{!}}
{{!}}}


}}




[[Category:{{{model}}} User Manual]]
[[Category:{{{model}}} User Manual]]

Aktualna wersja na dzień 08:07, 24 kwi 2024

The QuickSetup page of {{{model}}} {{{type}}} is used to set the main functions of the device.

Local Area Network

In Local Area Network section you can set local IP address and IP netmask of the {{{model}}}. IP netmask must be entered in CIDR notation.

Web ipchange.png

IP address change

To change the IP address:

  • Write new address and use green "+" button.

Web ipchange 2.png

  • Save settings and wait for "Configuration changes applied." message.
  • Delete "old" IP address by using red "x" button.
  • Save settings, wait a while and type new address in the web browser.

Modem/GSM network

The Modem/GSM network section is used to configure the modem settings.

SIM1

The SIM1 tab is used to configure external (main, master) SIM card parameters (in other words, how modem will establish the mobile connection).

Name Value Description
APN string, default: internet An Access Point Name (APN) is the name of a gateway between a GSM, GPRS, 3G and 4G mobile network and another computer network, frequently the public Internet.
PIN 4-digit number A personal identification number (PIN), or sometimes redundantly a PIN number or PIN code, is a numeric (sometimes alpha-numeric) passcode used in the process of authenticating a user accessing a system.
user string APN username used in connection authentication
password string APN password used in connection authentication



Bands & Frequencies

Bands & Frequencies tab is used to manage the modem bands (2G, 3G and 4G) and set module LTE frequencies.

Name Value Description
LTE/3G/2G 2G, 3G, 4G, 2G>3G, 3G>2G, 4G>3G, 3G>4G, 4G>2G, 2G>4G, 4G>3G>2G or 2G>3G>4G. Default: 4G>3G>2G Force the modem band. E.g. when "2G>4G" mode is selected, modem will try to login to the network using 2G band first, then to 4G.
LTE frequencies Europe/USA. Default: Europe Set LTE frequencies region





[[Category:{{{model}}} User Manual]]

Źródło: „http://wiki.elpromaelectronics.com/index.php?title=Szablon:Web_quicksetup&oldid=214800”