Szablon:Web openvpn

The OpenVPN page of {{{model}}} router is used to configure the OpenVPN tunnel.

OpenVPN

OpenVPN is a virtual private network (VPN) system that implements techniques to create secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. It implements both client and server applications.

OpenVPN Instances

In this section you can find a list of configured OpenVPN instances and their current state.

Name	Description
Name
Enabled	Check box for enabling the instance
Started	Start status
Start/Stop	Start or stop the instance
Port	Instance port number
Protocol	Type of protocol

To enable the instance check the Enabled box and to start/stop specific instance use Start/Stop button. You can also edit or delete each instance.

OpenVPN - Add from template

To add new OpenVPN instance from template provide instance name, choose the template and use Add button.

Name	Value	Description
Name	string	Instance name
Template	Client configuration for an ethernet bridge VPN, Client configuration for a routed multi-client VPN, Simple client configuration for a routed point-to-point VPN, Server configuration for an ethernet bridge VPN, Server configuration for a routed multi-client VPN or Simple server configuration for a routed point-to-point VPN, default: none	Instance template

OpenVPN - Add from OVPN configuration file

To add new OpenVPN instance from OVPN file provide instance name, upload the .ovpn file and use Upload button.

OpenVPN - Edit: basic

There are two configurations modes: basic and advanced. The table below shows how to configure the OpenVPN instance in Basic mode.

Name	Value	Description
verb	-- remove --, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 or 11, default: 3	Set output verbosity. Level 3 is recommended if you want a good summary of what's happening without being swamped by output. 0 means No output except fatal errors.
port		TCP/UDP port for both local and remote
nobind		Do not bind to local address and port
keepalive		Helper directive to simplify the expression of --ping and --ping-restart in server mode configurations
client		Configure client mode
remote		Remote host name or IP address
ca		Certificate authority
cert		Local certificate
key		Local private key
proto		Use protocol

OpenVPN - Edit: advanced

To Edit OpenVPN instance .

Name	Value	Description
Name	string	Instance name

[[Category:{{{model}}} User Manual]]