Szablon: QuickStart: Różnice pomiędzy wersjami
Z Elproma Wiki Knowledge Base
| Linia 5: | Linia 5: | ||
Complete package contains: | Complete package contains: | ||
* | * {{model}} | ||
* Antenna GSM (SMA connector) | * Antenna GSM (SMA connector) | ||
* Power adapter | * Power adapter | ||
Wersja z 10:11, 20 paź 2022
This page contains instructions on how to get started with {{{model}}} and how to configure it.
Package contents
Complete package contains:
- Szablon:Model
- Antenna GSM (SMA connector)
- Power adapter
- Wall holder
Variants
List below shows typical configuration and different variants of the {{{model}}} router.
| Function | Typical | Option |
|---|---|---|
| Power supply | 9-30V | - |
| Memory | 256MB RAM, 512MB MicroSD card (part used for Linux system, the size of SD card can be changed in the future) | - |
| Processor | Cortex A7, max. 528MHz, I.MX6UL(L) | - |
| RS232 | System console | - |
| RS485 | 1 | - |
| Connection | UMTS/LTE Cat. 1 | LTE Cat. 4 |
| Dual SIM | available | - |
| LAN | Ethernet 10/100Mbps | - |
| Wi-Fi + Bluetooth | - | available |
| GNSS receiver | - | available (variant without WiFi+Bluetooth) |
Presentation
Front panel
Plik:RBMTX-Lite frontpanel.png
Backpanel
Setting up the device
Inserting SIM cards
- Push yellow button placed on the front panel and take external SIM drawer out.
- Place the SIM card in the holder as shown in the picture.
- Put the drawer into the router.
To insert the second (internal) SIM card unscrew one of the routers panel, eject PCB board and put the SIM into internal SIM holder.
Connecting antennas
- Connect GSM/UMTS/LTE antenna to SMA connector marked as "GSM"
- Connect WiFi + Bluetooth antenna to SMA connector marked as "WiFi/BT"
[[Category:{{{model}}}]]