Mobile Internet access - example: Różnice pomiędzy wersjami

Z Elproma Wiki Knowledge Base
Skocz do: nawigacja, szukaj
 
Linia 1: Linia 1:
In this page we are describing the example of mobile Internet access from RBMTX series routers.
In this page we are describing the example of mobile Internet access from RBMTX series routers and RB900SG-ElpOS modem.


First you need to set SIM card(s) parameters in ''QuickSetup'' menu tab. You need to provide SIM1/SIM2 APN and (optionaly) PIN, username and password.
First you need to set SIM card(s) parameters in ''QuickSetup'' menu tab. You need to provide SIM1 (and SIM2, when supported) APN and optionaly PIN, username and password.


[[File:example_mobileinternet.png|400px]]
[[File:example_mobileinternet.png|400px]]
Linia 9: Linia 9:
[[File:example_mobiledashboard.png|400px]]
[[File:example_mobiledashboard.png|400px]]


Then, go to ''Network'' -> ''Interfaces'' and edit ''SIM1'' or/and ''SIM2'' settings. In''Create / Assign firewall-zone'' set ''wan (sim1)'' in ''Firewall Settings'' menu tab. Save settings and check if the router provides internet access.
Then, go to ''Network'' -> ''Interfaces'' and edit ''SIM1'' or/and ''SIM2'' settings. In''Create / Assign firewall-zone'' set ''wan (sim1)'' in ''Firewall Settings'' menu tab. Save settings and check if the device provides internet access.


[[File:example_mobileinternet2.png|800px]]
[[File:example_mobileinternet2.png|800px]]


Now check if the router provides internet access. If not, please check the network card properties or if other network interface is not interfering the communication (e.g. WiFi).
If not, please check the network card properties or if other network interface is not interfering the communication (e.g. WiFi).

Aktualna wersja na dzień 15:20, 17 kwi 2024

In this page we are describing the example of mobile Internet access from RBMTX series routers and RB900SG-ElpOS modem.

First you need to set SIM card(s) parameters in QuickSetup menu tab. You need to provide SIM1 (and SIM2, when supported) APN and optionaly PIN, username and password.

Example mobileinternet.png

Check in Dashboard if the GSM/LTE modem has logged into the network correctly.

Example mobiledashboard.png

Then, go to Network -> Interfaces and edit SIM1 or/and SIM2 settings. InCreate / Assign firewall-zone set wan (sim1) in Firewall Settings menu tab. Save settings and check if the device provides internet access.

Example mobileinternet2.png

If not, please check the network card properties or if other network interface is not interfering the communication (e.g. WiFi).