RBMTX-Viper QuickStart: Różnice pomiędzy wersjami
Z Elproma Wiki Knowledge Base
Znaczniki: Ręczne wycofanie zmian Wycofane |
|||
| (Nie pokazano 14 pośrednich wersji utworzonych przez tego samego użytkownika) | |||
| Linia 1: | Linia 1: | ||
{{Template: | {{Template: QuickStart | ||
| model = RBMTX-Viper | | model = RBMTX-Viper | ||
| type = router | | type = router | ||
| ant_marking = "GSM" | | ant_marking = "GSM" | ||
| power_adapter = 1 | |||
| power_source = adapter | |||
| wifi = 1 | |||
| lan = 1 | |||
| variants = 1 | |||
| wireless = 1 | |||
}} | }} | ||
Aktualna wersja na dzień 12:47, 10 maj 2023
This page contains instructions on how to get started with RBMTX-Viper router and how to configure it.
Package contents
Complete package contains:
- RBMTX-Viper router
- WiFi antenna (SMA connector)
- Power adapter
Variants
List below shows typical configuration and different variants of the RBMTX-Viper router.
| Function | Typical | Option |
|---|---|---|
| Memory | - | |
| Processor | - | |
| RS485 | 1 | - |
| USB 2.0 | 1 | - |
| Connection | LTE Cat. 4, global version | - |
| Dual SIM | yes | eSIM |
| Ethernet | 4 x Gigabit ports (1x WAN, 3x LAN) | - |
| GPIO | x 7 | - |
| PoE | yes, passive PoE pass through | - |
| Wi-Fi | IEEE 802.11a/b/g/n/ac - 2,4 GHz and 5 GHz | - |
| Bluetooth | 5.0 | - |
| GNSS receiver | - | Multi-constellation (GPS, GLONASS, BDS, Galileo and QZSS) |
| RTC | - | yes, with battery backup |
Presentation
Front
Back
Setting up the router
Inserting SIM cards
- Push yellow button placed on the front panel and take SIM drawer(s) out.
- Place the SIM card in the holder as shown in the picture.
- Put the drawers into the router.
Connection
- Connect GSM/LTE antenna to SMA connector marked as "GSM"
- Connect power adapter into power supply connector
- Connect WiFi + Bluetooth antenna to SMA connector marked as "WiFi/BT" (variant with WiFi/BT option)
- Connect LAN/WAN cable(s)