Szablon: Connectors: Różnice pomiędzy wersjami
Z Elproma Wiki Knowledge Base
Linia 1: | Linia 1: | ||
This page contains connectors description of {{{model}}} {{{type}}}. | This page contains connectors description of {{{model}}} {{{type}}}. | ||
==Antenna connectors== | |||
===GSM antenna connector=== | |||
{{#switch: {{{model}}} | {{#switch: {{{model}}} | ||
| | | RB900L3 = SMA “ANT” input is used to connect external GSM/LTE antenna. To establish a connection with a GSM/LTE network, an external antenna must be used. Type of antenna depends of GSM/LTE coverage. In good circumstances (level of received signal is high) use antenna contained in the package. If the range of GSM/LTE is low or none, an outdoor or indoor (for instance in place where GSM/LTE range is sufficient) antenna should be used. | ||
=== | '''''Note:''' If there is no antenna connected to SMA connector, the connection with GSM/LTE network is impossible.'' | ||
[[File:RB900L3_antennagsm.png|600px|border|class=tlt-border]] | |||
===GPS antenna connector=== | |||
An SMA "GPS" input is used to connect an external GPS antenna. To establish connection with GPS sattelites and check the coordinates of the device, an external antenna must be used and should be located outdoors. | |||
[[File:RB900L3_antennagps.png|600px|border|class=tlt-border]] | |||
SMA connector placed on back panel of device is used to connect external GSM/LTE antenna for {{{model}}}. To establish a connection with the network an external antenna must be used. Type of antenna depends on network coverage. In good circumstances (level of received signal is high) use antenna which is included in the package. If range of network signal is low or none, an outdoor directional/omnidirectional or indoor (for instance in place where signal range is sufficient) antenna should be used. | | RBVND-Lite = SMA connector placed on back panel of device is used to connect external GSM/LTE antenna for {{{model}}}. To establish a connection with the network an external antenna must be used. Type of antenna depends on network coverage. In good circumstances (level of received signal is high) use antenna which is included in the package. If range of network signal is low or none, an outdoor directional/omnidirectional or indoor (for instance in place where signal range is sufficient) antenna should be used. | ||
'''''Note:''' If there is no antenna connected to SMA connector, the connection with network is impossible.'' | '''''Note:''' If there is no antenna connected to SMA connector, the connection with network is impossible.'' | ||
}} | }} | ||
Linia 13: | Linia 26: | ||
{{#switch: {{{model}}} | {{#switch: {{{model}}} | ||
| RB900L3 = === Front === | |||
[[File:RB900L3_interfacesfront.png|600px|border|class=tlt-border]] | |||
=== Back=== | |||
[[File:RB900L3_interfacesback.png|600px|border|class=tlt-border]] | |||
<b>USB</b> | |||
{{{model}}} {{{type}}} is equipped with a USB interface (as shown below) – miniUSB connector. | |||
[[File:RB900L3_interfacesusb.png|600px|border|class=tlt-border]] | |||
<b>RS232</b> | |||
{{{model}}} {{{type}}} is equipped with an RS232 interface (as shown below). The DE9 DSUB socket is connected via a voltage level translator circuit to the GSM/LTE module. | |||
[[File:RB900L3_interfacesrs232.png|600px|border|class=tlt-border]] | |||
Table of RS232 pins (DCE female connector): | |||
[[File:RB900L3_interfacesrs232pinout.png|600px|border|class=tlt-border]] | |||
{{{!}} class="wikitable" style="text-align: center; margin: auto" | |||
{{!}}- | |||
! Pin | |||
! Name | |||
! Direction | |||
! Description | |||
{{!}}- | |||
{{!}} 1 | |||
{{!}} DCD | |||
{{!}} OUT | |||
{{!}} Data Carrier Detect | |||
{{!}}- | |||
{{!}} 2 | |||
{{!}} RD | |||
{{!}} OUT | |||
{{!}} Receive Data (a.k.a RxD, Rx) | |||
{{!}}- | |||
{{!}} 3 | |||
{{!}} TD | |||
{{!}} IN | |||
{{!}} Transmit Data (a.k.a TxD, Tx) | |||
{{!}}- | |||
{{!}} 4 | |||
{{!}} DTR | |||
{{!}} IN | |||
{{!}} Data Terminal Ready | |||
{{!}}- | |||
{{!}} 5 | |||
{{!}} GND | |||
{{!}} - | |||
{{!}} Ground | |||
{{!}}- | |||
{{!}} 6 | |||
{{!}} DSR | |||
{{!}} OUT | |||
{{!}} Data Set Ready | |||
{{!}}- | |||
{{!}} 7 | |||
{{!}} RTS | |||
{{!}} IN | |||
{{!}} Request To Send | |||
{{!}}- | |||
{{!}} 8 | |||
{{!}} CTS | |||
{{!}} OUT | |||
{{!}} Clear To Send | |||
{{!}}- | |||
{{!}} 9 | |||
{{!}} RI | |||
{{!}} OUT | |||
{{!}} Ring Indicator | |||
{{!}}} | |||
| RBVND-Lite = | | RBVND-Lite = | ||
=== Connection with vending machine === | === Connection with vending machine === |
Wersja z 13:04, 14 lis 2022
This page contains connectors description of {{{model}}} {{{type}}}.
Antenna connectors
GSM antenna connector
Interfaces
[[Category:{{{model}}} User Manual]]