Szablon: Technicalspecification: Różnice pomiędzy wersjami

Z Elproma Wiki Knowledge Base
Skocz do: nawigacja, szukaj
(Utworzono nową stronę "==Mechanical specification== {| class="wikitable" |- | Max. dimensions | Max, dimensions 100 x 70 x 27 mm |- | Weight | ≈ 120 g |- | Volume | 170 cm3 |} ===Sketch of the housing=== [[File:{{{model}}}_mechanical.png|400px|border|class=tlt-border]] ==Electrical specification== ===Power supply=== * Nominal voltage range: 5..30 V, 10%. * Maximum continous (average) supply range: 2.5 W. * Maximum continous (average) supply current: 200 mA at 12V, 100…")
 
Linia 59: Linia 59:
{| class="wikitable"
{| class="wikitable"
|-
|-
   !  
   ! Parameter
   !  
   ! Condition
   !  
   ! Min
   !  
   ! Max
   !  
   ! Unit
|-
|-
  | Ambient operating temperature
   |  
   |  
   |  
   | -20
   |  
   | 60
   |  
   | °C
  |
|-
|-
  | Storage temperature
   |  
   |  
   |  
   | -20
   |  
   | 45
   |  
   | °C
  |
|-
|-
  | ESD
  | At antenna connector Contact
Air
At interface connector
   |  
   |  
   |  
   | ± 6
  |
± 15
  |
± 1
   |  
   | KV
|-
|-
  | Humidity
   |  
   |  
   |  
   | 5
   |  
   | 85
   |  
   | %
  |
|}
|}


<span style="color:red">Warning!</span> Exceeding the above values may cause permanent damage to the modem.
<span style="color:red">Warning!</span> Exceeding the above values may cause permanent damage to the modem.
[[Category:{{{model}}} User Manual]]

Wersja z 14:41, 24 maj 2023

Mechanical specification

Max. dimensions Max, dimensions 100 x 70 x 27 mm
Weight ≈ 120 g
Volume 170 cm3

Sketch of the housing

[[File:{{{model}}}_mechanical.png|400px|border|class=tlt-border]]

Electrical specification

Power supply

  • Nominal voltage range: 5..30 V, 10%.
  • Maximum continous (average) supply range: 2.5 W.
  • Maximum continous (average) supply current: 200 mA at 12V, 100 mA at 24V.

RF specification

[[File:{{{model}}}_rf.png|400px|border|class=tlt-border]]

Antenna

The antenna must meet the requirements as in the table below:

Antenna frequency range Supporting GSM, UMTS or LTE frequencies
Impedance 50 Ω
DC impedance 0 Ω
Gain 0 dBi w/o cable; 2dBi w/ cable
VSWR (with cable) -10 dB

The antenna chosen for working with the modem should best fit to the circumstances of the environment it is used in. When the modem is placed in a room, or somewhere where the range of networks signal is too low, an outdoor or a specific indoor antenna should be used.

Environmental characteristic

Table below gives the environmental operating conditions of RB900SG terminal.

Parameter Condition Min Max Unit
Ambient operating temperature -20 60 °C
Storage temperature -20 45 °C
ESD At antenna connector Contact

Air At interface connector

± 6

± 15 ± 1

KV
Humidity 5 85 %

Warning! Exceeding the above values may cause permanent damage to the modem.

[[Category:{{{model}}} User Manual]]