Szablon: Technicalspecification: Różnice pomiędzy wersjami

Wersja z 12:41, 28 sie 2023

Mechanical specification

Max. dimensions	{{{dimensions}}}
Weight	{{{weight}}}
Volume	{{{volume}}}

Sketch of the housing

[[File:{{{model}}}_mechanical.png|600px|border|class=tlt-border]]

Electrical specification

Power supply

{{{powersupply}}}

RF specification

[[File:{{{model}}}_rf.png|600px|border|class=tlt-border]]

Antenna

The antenna must meet the requirements as in the table below:

Antenna frequency range	{{{antennarange}}}
Impedance	50 Ω
DC impedance	0 Ω
Gain	0 dBi w/o cable; 2dBi w/ cable
VSWR (with cable)	-10 dB

The antenna chosen for working with the modem should best fit to the circumstances of the environment it is used in. When the modem is placed in a room, or somewhere where the range of networks signal is too low, an outdoor or a specific indoor antenna should be used.

Environmental characteristic

Table below gives the environmental operating conditions of RB900SG terminal.

Parameter	Condition	Min	Max	Unit
Ambient operating temperature		{{{temperatureoperatingmin}}}	{{{temperatureoperatingmax}}}	°C
Storage temperature*		{{{temperaturestoragemin}}}	{{{temperaturestoragemax}}}	°C
ESD	{{{ESD}}}		± 6 ± 15 ± 1	KV
Humidity		humiditymin	humiditymax	%

- For long period of storage the recommended temperature range is from 15℃ to 35℃

Warning! Exceeding the above values may cause permanent damage to the modem.

[[Category:{{{model}}} User Manual]]

@@ Linia 65: / Linia 65: @@
    | Ambient operating temperature
    |
-   | -20
+   | {{{temperatureoperatingmin}}}
-   | 60
+   | {{{temperatureoperatingmax}}}
    | °C
 |-
    | Storage temperature*
    |
-   | -20
+   | {{{temperaturestoragemin}}}
-   | 45
+   | {{{temperaturestoragemax}}}
    | °C
 |-
    | ESD
-   | At antenna connector Contact
+   | {{{ESD}}}
-Air<br>
-At interface connector
    |
    | ± 6
@@ Linia 87: / Linia 85: @@
    | Humidity
    |
-   | 5
+   | humiditymin
-   | 85
+   | humiditymax
    | %
 |}