RBMTX-Lite Static Routes: Różnice pomiędzy wersjami
Z Elproma Wiki Knowledge Base
(Utworzono nową stronę "{{Template: Web_staticroutes | model = RBMTX-Lite }}") |
|||
| Linia 1: | Linia 1: | ||
{{Template: Web_staticroutes | {{Template: Web_staticroutes | ||
| model | | model = RBMTX-Lite | ||
| type = router | |||
}} | }} | ||
Aktualna wersja na dzień 12:59, 26 kwi 2024
The Static routes page of RBMTX-Lite router is used to specify over which interface and gateway a certain host or network can be reached.
Static IPv4 Routes
You can add, edit or delete the route using the corresponding buttons.
General settings
| Name | Value | Description |
|---|---|---|
| Interface | dhcp, gsm or lan, default: lan | |
| Disable | On/Off, default: Off | Disable this route |
| Target | default: 10.0.0.0/8 | Host-IP or Network |
| IPv4-Netmask | default: 255.0.0.0 | if target is a network |
| IPv4-Gateway | default: 10.10.0.1 |
Advanced settings
| Name | Value | Description |
|---|---|---|
| Metric | ||
| MTU | ||
| Route type | unicast, local, broadcast, multicasat, unreachable, prohibit, blackhole or anycast, default: unicast | |
| Route table | local (255), main (254) or default (253), default: main (254) | |
| Source Address | automatic or 192.168.1.234, default: automatic | |
| On-Link route | On/Off, default: Off |
Static IPv6 Routes
Click the Add button at the bottom to set up more than one action or Delete to remove it.
