Szablon: Web ledconfiguration: Różnice pomiędzy wersjami

Wersja z 09:26, 25 maj 2022

The LED Configuration page of {{{model}}} router is used to custimize LED behaviour if possible.

LED Configuration

{{{model}}} router has four LEDs marked as U1 (red), U2 (blue), S (yellow) and PWR (green) which are located next to power supplu connector. User can control U1 and U2 LEDs. To add LED behaviour use Add LED action button. You can also change the configuration order and edit or delete the configuration.

Name	Value	Description
Name	string	Name of the behaviour
LED Name	blue-led, mmc0::, mmc1::, red-led, default: blue-led
Trigger	Always on (kernel: default-on), Heartbeat interval (kernel: heartbeat), Network device activity (kernel: network), Always off: (kernel: none) or Custom flash interval (kernel: time), default: Always on (kernel: default-on)
Default state	On/Off, default: off	available when Trigger is set to Always on (kernel: default-on)
Device	unspecified, br-lan, eth0 or wwan0, default: unspecified	available when Trigger is set to Network device activity (kernel: network)
Trigger Mode	Link On, Transmit or Receive	available when Trigger is set to Network device activity (kernel: network)
On-State Delay	number [ms]	available when Trigger is set to Custom flash interval (kernel: time)
Off-State Delay	number [ms]	available when Trigger is set to Custom flash interval (kernel: time)

[[Category:{{{model}}} User Manual]]

@@ Linia 3: / Linia 3: @@
 ==LED Configuration==
-In <b>LED Configuration</b> section you can
+{{{model}}} router has four LEDs marked as U1 (red), U2 (blue), S (yellow) and PWR (green) which are located next to power supplu connector. User can control U1 and U2 LEDs. To add LED behaviour use Add LED action button. You can also change the configuration order and edit or delete the configuration.
-To add LED behaviour use Add LED action button. You can also change the configuration order and edit or delete the configuration.
 [[File:web_systemled.png|800px|border|class=tlt-border]]