Szablon: Web wireless: Różnice pomiędzy wersjami

Wersja z 13:24, 16 sie 2022

The Wireless page of {{{model}}} router is used to check and manage wireless networks.

Wireless Overview

In Wireless Overview section you can see a list of wireless networks. To restart, scan, disable, edit, add or remove specific network use the corresponding buttons.

Scan

To check available WiFi networks use the Scan button.

Name	Description
Signal	Network signal strength
SSID	Network name
Channel
Mode	Master or Slave
BSSID	Identify Access Point and its associated client
Encryption	Encryption type

To connect to the specific network use Join Network button.

Name	Value	Description
Replace wireless configuration	On/Off, default: Off	Check this option to delete the existing networks from this radio.
Name of the new network	string	The allowed characters are: A-Z, a-z, 0-9 and _
WPA passphrase	string, from 8 to 63 characters	Specify the secret encryption key here.
Lock to BSSID	On/Off, default: Off	Instead of joining any network with a matching SSID, only connect to the BSSID 82:8A:20:FF:FD:23.
Create / Assign firewall-zone		Choose the firewall zone you want to assign to this interface. Select unspecified to remove the interface from the associated zone or fill out the custom field to define a new zone and attach the interface to it.

Add

To add new network use the Add button.

General Setup

Name	Value	Description
Status		Network status
Wireless network is enabled	button	Use Disable button to disable this network.
Operating frequency	Mode: N or Legacy, Channel: from 1 (2412 MHz) to 11 (2462 MHz)
Allow legacy 802.11b rates	On/Off, default: Off	Legacy or badly behaving devices may require legacy 802.11b rates to interoperate. Airtime efficiency may be significantly reduced where these are used. It is recommended to not allow 802.11b rates where possible.
Maximum transmit power	driver default or from 0 dBm (1 mW) to 17 dBm (50 mW)	Specifies the maximum transmit power the wireless radio may use. Depending on regulatory requirements and wireless usage, the actual transmit power may be reduced by the driver.

Associated Stations

[[Category:{{{model}}} User Manual]]

@@ Linia 62: / Linia 62: @@
    |
    | Choose the firewall zone you want to assign to this interface. Select unspecified to remove the interface from the associated zone or fill out the custom field to define a new zone and attach the interface to it.
+|}
+===Add===
+To add new network use the Add button.
+<b>General Setup</b>
+{| class="wikitable"
+|-
+  ! Name
+  ! Value
+  ! Description
+|-
+  | Status
+  |
+  | Network status
+|-
+  | Wireless network is enabled
+  | button
+  | Use Disable button to disable this network.
+|-
+  | Operating frequency
+  | Mode: N or Legacy, Channel: from 1 (2412 MHz) to 11 (2462 MHz)
+  |
+|-
+  | Allow legacy 802.11b rates
+  | On/Off, default: Off
+  | Legacy or badly behaving devices may require legacy 802.11b rates to interoperate. Airtime efficiency may be significantly reduced where these are used. It is recommended to not allow 802.11b rates where possible.
+|-
+  | Maximum transmit power
+  | driver default or from 0 dBm (1 mW) to 17 dBm (50 mW)
+  | Specifies the maximum transmit power the wireless radio may use. Depending on regulatory requirements and wireless usage, the actual transmit power may be reduced by the driver.
 |}