Szablon: Connectors: Różnice pomiędzy wersjami

Wersja z 14:01, 26 paź 2022

This page contains connectors description of {{{model}}} {{{type}}}.

@@ Linia 17: / Linia 17: @@
 === Connection with vending machine ===
-The type of cable that should be used to connect the modem to the machine depends on the machine communication protocol. There are two types of cables:
+# It is necessary to connect the cable for machine with MDB protocol and RS232 DEX(DDCMP) connection to EVA-DTS
-# Cable for machine with MDB protocol and RS232 DEX(DDCMP) connection to EVA-DTS
 [[File:RBVND-Lite_MDBcable.png|600px|border|class=tlt-border]]
-# Cable for machine with DEX protocol on Jack to EVA-DTS
+The diagram and pinout of the 20-pin connector are presented below.
-[[File:RBVND-Lite_MDBcable.png|600px|border|class=tlt-border]]
+[[File:RBVND-Lite_MDBpinout.png|600px|border|class=tlt-border]]
-The diagram and description of the 20-pin connector are presented below.
+{{!}} class="wikitable"
+{{!}}-
+  ! Pin
+  ! Description
+  ! Pin
+  ! Description
+{{!}}-
+  {{!}} 1
+  {{!}} MDB PWR
+  {{!}} 11
+  {{!}} MDB GND
+{{!}}-
+  {{!}} 2
+  {{!}} MDB PWR
+  {{!}} 12
+  {{!}} MDB GND
+{{!}}-
+  {{!}} 3
+  {{!}} EXE + / -
+  {{!}} 13
+  {{!}} EXE + / -
+{{!}}-
+  {{!}} 4
+  {{!}} I / O 1
+  {{!}} 14
+  {{!}} I / O 3
+{{!}}-
+  {{!}} 5
+  {{!}} I / O 2
+  {{!}} 15
+  {{!}} I / O 4
+{{!}}-
+  {{!}} 6
+  {{!}} MDB TX
+  {{!}} 16
+  {{!}} MDB COM
+{{!}}-
+  {{!}} 7
+  {{!}} MDB RX
+  {{!}} 17
+  {{!}} PWR 5V
+{{!}}-
+  {{!}} 8
+  {{!}} GND
+  {{!}} 18
+  {{!}} GND
+{{!}}-
+  {{!}} 9
+  {{!}} RS1 CTS
+  {{!}} 19
+  {{!}} RS1 RX
+{{!}}-
+  {{!}} 10
+  {{!}} RS1 RTS
+  {{!}} 20
+  {{!}} RS1 TX
+{{!}}
-[[File:RBVND-Lite_MDBcable.png|600px|border|class=tlt-border]]
+GND – ground. '''Do not connect directly with minus of power supply input.'''
 }}

Szablon: Connectors: Różnice pomiędzy wersjami

Wersja z 14:01, 26 paź 2022

Antenna connectors

Interfaces