Szablon: Connectors: Różnice pomiędzy wersjami

Wersja z 09:22, 2 sie 2023

This page contains connectors description of {{{model}}} {{{type}}}.

[[Category:{{{model}}} User Manual]]

@@ Linia 341: / Linia 341: @@
 {{!}}}
-{{#ifeq: {{{model}}} | NTS-pico3 | Available modes for RS232:
+===LAN connector===
-* None.
-* Forwarding.
-* Terminal – Unlocks standard SSH like console on serial port.
-* ModBus gateway.
-* GPS NMEA – copies NMEA output from GNSS module and sends it to serial port. Included messages are: RMC, GSV, GSA, GGA.
-* PTP NMEA – simulates NMEA messages based on PTP synchronization status. Requires PTP to be enabled. Included messages are: RMC, ZDA.
-}}
-     | RBMTX-Lite|NTS-pico3 = ===LAN connector===
 Second RJ-45 connector (marked as "LAN") is placed next to serial connector and is used for communication with PC or laptop through Ethernet interface. WWW configuration is available in the web browser (default IP address is 192.168.1.234). You can change the default address in [[{{{model}}}_QuickSetup]].
@@ Linia 500: / Linia 491: @@
 GND – ground. '''Do not connect directly with minus of power supply input.'''
-      | NTS-pico3 = ===TR switch===
+      | NTS-pico3 =
-TR switch is is used to add the termination resistance for RS485 interface.
 }}
 [[Category:{{{model}}} User Manual]]