Szablon: Web ledconfiguration
Z Elproma Wiki Knowledge Base
The LED Configuration page of {{{model}}} router is used to custimize LED behaviour if possible.
LED Configuration
In LED Configuration section you can To add LED behaviour use Add LED action button. You can also change the configuration order and edit or delete the configuration.
| Name | Value | Description |
|---|---|---|
| Name | string | Name of the behaviour |
| LED Name | blue-led, mmc0::, mmc1::, red-led, default: blue-led | |
| Trigger | Always on (kernel: default-on), Heartbeat interval (kernel: heartbeat), Network device activity (kernel: network), Always off: (kernel: none) or Custom flash interval (kernel: time), default: Always on (kernel: default-on) | |
| Default state | On/Off, default: off | available when Trigger is set to Always on (kernel: default-on) |
| Device | unspecified, br-lan, eth0 or wwan0, default: unspecified | available when Trigger is set to Network device activity (kernel: network) |
| Trigger Mode | Link On, Transmit or Receive | available when Trigger is set to Network device activity (kernel: network) |
| On-State Delay | number [ms] | available when Trigger is set to Custom flash interval (kernel: time) |
| Off-State Delay | number [ms] | available when Trigger is set to Custom flash interval (kernel: time) |
[[Category:{{{model}}} User Manual]]