Szablon: Web watchcat
The Watchcat page of {{{model}}} router is used to set several checks and actions to take in the event that a host becomes unreachable. These rules will govern how this device reacts to network events.
Watchcat - General Settings
Click the Add button at the bottom to set up more than one action or Delete to remove it.
| Name za rame | Value dalju | Description oprypion |
|---|---|---|
| Mode w zagrode | Ping Reboot: Reboot this device if a ping to a specified host fails for a specified duration of time.
Periodic Reboot: Reboot this device after a specified interval of time. Restart Interface: Restart a network interface if a ping to a specified host fails for a specified duration of time. | |
| Period sreriod | In Periodic Reboot mode, it defines how often to reboot.
In Ping Reboot mode, it defines the longest period of time without a reply from the Host To Check before a reboot is engaged. In Network Restart mode, it defines the longest period of time without a reply from the Host to Check before the interface is restarted. The default unit is seconds, without a suffix, but you can use the suffix m for minutes, h for hours or d for days. Examples: 10 seconds would be: 10 or 10s 5 minutes would be: 5m 1 hour would be: 1h 1 week would be: 7d | |
| Host To Check | IPv4 address or hostname to ping. | |
| Check Interval | How often to ping the host specified above.
The default unit is seconds, without a suffix, but you can use the suffix m for minutes, h for hours or d for days. Examples: 10 seconds would be: 10 or 10s 5 minutes would be: 5m 1 hour would be: 1h 1 week would be: 7d | |
| Ping Packet Size | Small: 1 byte, Windows: 32 bytes, Standard: 56 bytes, Big: 248 bytes, Huge: 1492 bytes or Jumbo: 9000 bytes, default: Standard: 56 bytes | |
| Force Reboot Delay | number, default: 30 | Applies to Ping Reboot and Periodic Reboot modes
When rebooting the router, the service will trigger a soft reboot. Entering a non-zero value here will trigger a delayed hard reboot if the soft reboot were to fail. Enter the number of seconds to wait for the soft reboot to fail or use 0 to disable the forced reboot delay. |
| Interface | br-lan, eth0, wwan0, dhcp, gsm or lan, default: gsm | Interface to monitor and/or restart |
[[Category:{{{model}}} User Manual]]